Would you like to add a photo to your quilt that looked more like part of the fabric than an iron-on decal?
Before, we trusted photo transfer paper to iron our photo onto our quilt block. Have you ever heard about direct-to-garment printing? It’s an excellent new way of getting your chosen photo out of your scrapbook and on to your quilt block.
Direct-to-garment (DTG) printing is a form of digital printing. Using a price of about $20,000, it’s not practical to perform out and get your very own DTG printer. The typical price for latte printer is $8 to $10.
This procedure might be a more expensive than the traditional photo transfer method. That’s partially as the technology is really new. Should you opt to try a DTG photo on your memory quilt block, there are some things to look for in selecting the printer that will do the work for you:
1. Make sure there are actually no chemicals needed to pre-treat your fabric first. Some DTG printers create a picture which is much more like screen printing. You don’t want that appear to be or feel in your quilt. The ink will probably be hard on top of the fabric and definately will eventually (sometimes much earlier than later) are going to crack and wear with washings. Ask your prospective printer to discover a sample of something they’ve printed. When you can have the ink is raised on top of the surface in any respect in any way, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.
2. Use a type of digital DTG printing provided by the Brother GT 541. You will find no chemicals needed to pre-treat the material. The inks bond with all the natural fibers and are heat cured to set the graphic. The inks are water based, which will help leave a soft yet crisp image on your own fabric.
There are a few downfalls to using led uv printer on the quilt blocks. One pitfall is color limitations. Since DTG printing is actually a form a digital printing, there is no white ink. White is the absence of color. Consequently you cannot print a photograph on dark blue or black fabric.
Digital garment or fabric printing can be a CMYK format – cyan, magenta, yellow, and black. You can mix those colors to obtain a full spectrum of accurate colors – not white. You will find DTG printers that print white ink, but most of the require chemical pre-treatments for the material and may give you that thick surface print.
You must make use of a light colored or neutral fabric and it needs to be cotton or even a cotton blend. The material must be able to withstand 350 degrees for roughly thirty seconds. Should you be not 09dexypky with 100 percent cotton or a 50/50 blend, ask your printer if the fabric work.
Dimensions of your print might be a limitation. Most DTG printers have a printing field as much as 14 inches x 16 inches. For many quilters, that size range won’t become a problem.
And talking about printing fields, here’s a hint. Most direct to garment printer charge for any 14×16 surface. Should your blocks enables 2 or 3 photos to fit within that range, you could get them all printed for the buying price of one. Check with the printer to see if it’s possible together with your particular project.
Like most technological advances, the price of digital garment (or fabric) printing probably will decrease after a while. Maybe it is going to be available on smaller printers for home and private use. Until then, try to get a DTG printer for your forthcoming photo quilt project. The outcome may be like custom fabric, that is to be a great touch to your one of a kind quilt!